TubeOhm Jeannie DIY Synthesizer New Firmware V 3.xx.xxx

video upload by Andre' Laska

"Sound examples of the DIY synthesiser Jeannie with the new firmware V 3.xx.xxx
You already know Jeannie from previous videos. New is now the firmware version V 3.xx.xxx . for Jeannie
This includes various new oscillator models, e.g. from Braids , Shruthi / Phoenix and Ambika ."

TubeOhm DIY Synthesizer Jeannie

video upload by Andre' Laska

"You want to build a synthesizer yourself ? Preferably polyphonic ? And with effects like reverb , delay , chorus .....
Then have a look at this video. Jeannie is an brand new 8-voice polyphonic DIY synthesizer.
During the development we made sure that the instrument is relatively easy to build. But, component know how and soldering skills should be present. Then nothing stands in the way of a successful DIY.
This video gives a short overview of the individual construction steps. After that, some sounds are presented.
Approx. 400 sounds are currently available in 3 banks.
15 sound banks with 128 sounds each can be managed.
800 different waveforms and an effect DSP round off the synthesiser kit.
The synthesiser is freely programmable, the software open source.
Features: 2 DCOs/800 waveforms for each DCO , three LFOs with /64 waveforms each ,
two ADSR generators /lin/log/exp, FX DSP for effects like reverb , delay, chorus , phaser , pitch shifter .... and much more.

Du möchtest einen Synthesizer selber bauen ? Am besten polyfon ?? Und mit Effekten wie Hall , Delay , Chorus .....
Dann schaue dir doch dieses Video an. Jeannie ist ein 8 stimmiger polyfoner DIY Synthesizer.
Bei der Entwicklung haben wir darauf geachtet das das Instrument relativ einfach zu bauen ist . Aber, Bauteil know how und Lötkenntnisse sollten vorhanden sein. Dann steht einem erfolgreichen DIY nichts mehr im Weg.
Dieses Video gibt einen kurzen Überblick über die einzelnen Bauschritte . Danach werden einige Klänge vorgestellt.
Ca. 400 Sounds stehen aktuell in 3 Bänken zur Verfügung.
Es können 15 Soundbänke mit je 128 Sounds verwaltet werden .
800 verschiedene Wellenformen und ein Effekt DSP runden das Synthesizer Kit ab.
Der Synthesizer ist frei programmierbar, die Software open source.
Features: 2 DCOs/800 Wellenformen für jeden DCO , drei LFOs mit je /64 Wellenformen ,
zwei ADSR Generatoren /lin/log/exp, FX DSP für Effekte wie Hall , Delay, Chorus , Phaser , Pitchshifter .... und vieles mehr ."

Controlled by Arturia's The Factory MIDI keyboard controller.

TubeOhm SMR4P-Multi

video upload by Andre' Laska

"Stress test of the filter. No audio in signal was used. All sounds were generated with the filter resonance. A signal generator was only used to control the resonance and the different filter types. The video is handheld with a mobile phone. I thought it would be interesting for you to see what the filter alone can do.
The sound was recorded with a mobile phone."

The SMR4P-Multi contains the best from 2 worlds . First , it sounds warm like the SMR4 and second -
15 different filtertypes like the 4PM.
While doing sounddesign it is very helpfull to have a ' swiss knive' VCF. So we implement 15 different filtertypes like
6+12+18+24dB LP 6+12+18 dB HP 6+12 dB BP HP2LP, HP3LP Notch,Phaser, Notch+LP1, Phaser+LP1.

What else we have build in ?
There is also a FM posibility, an inbuild VCA , and you can switch the different filtertypes a:) manual or b:) voltage controlled.
Inputs: Audio in, Res= resonance contol (0..10 V),Gain(VCA control 0..10V) , Mod (extern) and Cut(V/OCT0..10V)
Outputs : VCA and VCF *** VCA, the output singal is contolled in its amplitude by Gain 0..10 v
VCF is the direct signal without VCA controll
DIY scills : good soldering knowledge , high integrated parts - through hole , no SMT

https://www.tubeohm.com/smr4p-multi.html

TubeOhm DIY JEANNIE Synthesizer

video by Andre' Laska

"First ( and fast) preview of our new DIY synthesizer Jeannie. It is 8 voices polyphonic and has an internal effect chip with reverb / echo / delay etc.

Jeannie is based on the Teensy 4.1 and the FV-1 chip.

Specs :
-8 Voices
-2 Oscillators /Voice
Wavetable with 180 waves / each oscillator
2 LFO
2 ADSR
1 multimode filter
UNISONO with 16 Oscillators
XOR / ring mod
14 effects
Fully programmable
Up to 1000 sounds can be stored.

Coming soon as a DIY kit."

TubeOhm De-Generator Video manual / german language, english subtitles

Published on Apr 17, 2019 Andre' Laska

"De-Generator DIY sample Synthesizer Video manual .
How to install the firmware and service software, how to use the oscillators and how to play samples."

TubeOhm De-Generator

TubeOhm De-Generator, wavefom manipulation- and drawing

Published on Sep 6, 2018 Andre' Laska

"a quick (and dirty) fast Video with new functions short before the release.
Direct record from the camera - so sorry for the sound quality
More on : https://www.tubeohm.com/page6.html
DIY manuals here: https://www.tubeohm.com/de-generator-..."

TubeOhm SMR4P-multi eurorack filter

Published on Jan 29, 2018 Andre' Laska

"Here is the new DIY SMR4P-multi Eurorack filter.
It contains 15 different filtertypes.
It comes as a DIY kit .
More Informatons on:
http://www.tubeohm.com/page9.html"

"The SMR4P-Multi contains the best from 2 worlds . First , it sounds warm like the SMR4 and second -
15 different filtertypes like the 4PM.
While doing sounddesign it is very helpfull to have a ' swiss knive' VCF. So we implement 15 different filtertypes like
6+12+18+24dB LP 6+12+18 dB HP 6+12 dB BP HP2LP, HP3LP Notch,Phaser, Notch+LP1, Phaser+LP1.

What else we have build in ?
There is also a FM posibility, an inbuild VCA , and you can switch the different filtertypes a:) manual or b:) voltage controlled.
Inputs: Audio in, Res= resonance contol (0..10 V),Gain(VCA control 0..10V) , Mod (extern) and Cut(V/OCT0..10V)
Outputs : VCA and VCF *** VCA, the output singal is contolled in its amplitude by Gain 0..10 v
VCF is the direct signal without VCA controll
DIY scills : good soldering knowledge , high integrated parts - through hole , no SMT"

TubeOhm Degenerator

Published on Oct 9, 2017 Andre' Laska

"Her is the latest Video from the DIY samplesynth De-Generator with
a new stepp sequenzer and some sound examples.
Next on TubeOhm.com"

De-Generator DIY samplesynthesizer

Published on Jan 13, 2017 Andre' Laska

"here is the first official video from our new De-Generator DIY samplesynthesizer."

Note this is a TubeOhm product.

"Features:
-monophon
-Display 320x200 full color
-stereo Filter 12 dB stereo 24dB mono
- LP,BP,HP
-filter-matrix
-inbuild delay
-sample up to 20 seconds REC/PLAY
-banks with 128 Samples on SD card
-128 inbuild waveforms for the oscillator
-SD-Ram card for Samples
-record functions for sampling on the fly
-loop functions for the samples
-mod matrix
-DIY friendly
-2 free prog knobs
-step sequencer

there is an endless list with all functions we have implement now ."

a new DIY-Synth comes with some new features like sampling, stereo, effects, loop functions, mod matrix ........

This is a screenshot from Hannes , and i think , yes this is closed near the final version."

TubeOhm Shruthi/Phoenix Stereo filter

Published on Jan 19, 2016 Andre' Laska

"Here is the new stereo filter for Shruthi and Phoenix,
This video shows you some sound examples and how to calibrate the filter board . Available on TubeOhm.com- next in a few days."

DIY, the -DeGenerator- a new DIY sample synth

Published on May 4, 2015 Andre' Laska

"here are the first impressions of the developement.
The Video is not in the best quality, also the sounds is only recorded with a camera mic.
The Degenerator is in developement."

TubeOhm super BRUNO-III

Published on Jan 3, 2015 Andre' Laska

"Sound examples from our new super Bruno-III Synthesizer
Coming soon on TubeOhm.com
Date 04.01.2015"

TubeOhm ShruthaCon S-P filterboard for Shruthi from Mutable Instruments

Published on Aug 26, 2014 Andre' Laska

"Based on the S-P Filter we develop now this filter for Shruthi.
All sound examples, base, bass+ synth sounds coming from Shruthi with the Shruthacon filter. It is available now for DIY on TubeOhm.com as a single PCB and complete kit with all parts.."

AMBIKA- MIDI CONTROLLER

Published on May 12, 2014 Andre' Laska·35 videos

"AMBIKA controlled by the MIDI-C controller
Coming soon on TubeOhm.com
Date 12.05.2014"

TubeOhm Alpha-Ray Synthesizer 4free

Published on Feb 21, 2014 Andre' Laska·34 videos

"Hello, this is a Alpha-Ray tutorial from one of our User .
Thanks Rolf very much for this
He also write a new english Manual with some additional infos.
You can download it from our Website.
TubeOhm."

TubeOhm PHASEWAVE VIDEO

Published on Nov 2, 2013 Andre' Laska·35 videos

"Sound examples from our new VSTi plugin Phasewave.
Coming soon on TubeOhm.com."

TubeOhm Ambika Ladder Video

Published on Jun 15, 2013 Andre' Laska·34 videos

"Here is our new Ladder Filter for the AMBIKA Synthesizer from Mutable Instruments.
With one PCB you can build three Ladder Filter, first a transistor ladder or a a diode ladder or a LED ladder. You will hear soundexamples from the prototype. The PCB comes next as a DIY kit on tubeohm.com"

Shruthi-1-TubeOhm Ladder-Video1

Published on Mar 25, 2013 Andre' Laska·33 videos

"Here is the sound of the ladder Filter for Shruthi 1.
The Ladder and the SMR-4 mk II uses the same patches.
I use only a delay as an effect for both filter.!
Hopy you will hear the different carakter .
More next on tubeohm.com"